Auto Dynamix Newton Abbot
Auto Dynamix Newton Abbot

Mitusbishi Link Plug In ECU

EVOLINK (I-III) - #EVO3+

 

Free yourself from the constraints of factory engine management with the EVOLink ECU:

 

    •    Fits inside the original factory enclosure

    •    No alteration of the factory wiring

    •    ECU Installation is a breeze

 

The Link G4+ EVOLink (I-III) EVO3+ PlugIn fits the Mitsubishi EVO 1-3.

 

A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches. 

 

Factory features are supported - see Features for any exceptions. Includes on-board 4 Bar MAP sensor.

 

Need more inputs and outputs? 

The XS Expansion Loom offers the ability to add additional inputs & outputs on our range of plug-in ECUs. 

 

Includes Integrated 4 Bar MAP Sensor.

 

VR4LINK - #VR4+

 

Free yourself from the constraints of the factory ECU.

 

The Link G4+ VR4Link VR4+ PlugIn fits the Mitsubishi VR4 4G63T. The ECU PCB fits discretely inside the original factory enclosure. 

 

Installation of Link's VR4 ECU is a breeze, with no alteration of the factory wiring loom required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches. 

 

Factory features are supported - see Features for any exceptions.

 

Need more inputs and outputs? 

The XS Expansion Loom offers the ability to add additional inputs & outputs on our range of plug-in ECUs. 

 

Includes Integrated 4 Bar MAP Sensor.

 

EVOLINK (IV-VIII) - #EVO8+ WITH E-THROTTLE

 

Free yourself from the constraints of the factory ECU.

 

The Link G4+ EVOLink (IV-VIII) EVO8+ PlugIn fits the Mitsubishi EVO 4-8. The ECU PCB fits discretely inside the original factory enclosure. 

 

Installation of the EVOLink #EVO8+ ECU is a breeze - no alteration of the factory wiring loom is required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches. 

 

Factory features are supported - see Features for any exceptions. 

 

Fits EVO VIII 4 plug versions only, inlcudes on-board 4 bar MAP sensor.

 

Need more inputs and outputs? 

The XS Expansion Loom offers the ability to add additional inputs & outputs on our range of plug-in ECUs. 

 

EVOLINK (IX) - EVO9+ WITH E-THROTTLE

 

Free yourself from the constraints of the factory ECU. 

 

The Link G4+ EVOLink (IX) EVO9+ PlugIn fits the Mitsubishi EVO 9. The ECU PCB fits discretely inside the original factory enclosure. 

 

Installation of the EVOLink #EVO9+ ECU is a breeze - no alteration of the factory wiring loom is required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches. 

 

Factory features are supported - see Features for any exceptions.

 

Fits EVO VIII 3 plug versions.

 

Includes Integrated 4 Bar MAP Sensor.

 

Need more inputs and outputs? 

The XS Expansion Loom offers the ability to add additional inputs & outputs on our range of plug-in ECUs. 

 
Print Print | Sitemap
© Auto Dynamix

Call

E-mail

Directions